Bicycle Cables

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5. 75mm - Overall length: 12. 7mm - Material: brass - Bottle of 50pcs

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

Shimano, SP41, 4mm Shifter housing, 50m

Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors

- Front or rear brake - MTB specific - 1.5mm stainless cable

- Extra long cable length - Road and MTB brake cable ends - 1.6mm x 1900mm

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

- High-performance compressionless outer casing designed for precise and effortless shifting - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Recommended for 10-speed drivetrains - 10-speed or less shifting system recommended - Compatible with Shimano® and SRAM® shifting systems Includes: 2 x Sealed End Cap, Alloy/Black 8 x Open End Cap, Alloy/Black 6 x Cable Oring, Translucent (2 sets = 6pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver